Skip to main content
Electronic throttle controlSafety screen firstReviewed July 15, 2026
P2135

Throttle/pedal position sensor A/B voltage correlation

P2135 means the controller detected disagreement between redundant throttle-position or pedal-position signals beyond its allowed relationship. It does not identify a failed part or establish a repair price by itself.

Evidence branches

Conditions that can produce P2135

These are diagnostic branches, not a ranked shopping list. Testing order depends on the exact vehicle and failure scene.

  • Throttle-position tracks disagree
  • Pedal-position tracks disagree
  • 5-volt reference or sensor-ground problem
  • Connector fretting, water, or harness damage
  • Throttle body mechanical or internal fault
Next checks

What to inspect next

  1. Do not rely on a vehicle with unpredictable or reduced throttle response
  2. Identify whether the definition applies to throttle or pedal tracks on the exact vehicle
  3. Graph both redundant signals through a controlled sweep
  4. Test reference, ground, terminals, and harness before replacement
Evidence quality

What strengthens the answer

A/B signal correlation traceReference and ground voltageConnector and harness inspectionThrottle command, position, and reduced-power event data
Repair verification

Prove what changed

Preserve the pre-repair record, document exactly what changed, and repeat the relevant operating condition safely. Confirm that current or pending faults do not return, review permanent-code and readiness state where applicable, and state which tests or modules remained unavailable.

Direct answers

P2135 questions

What does P2135 mean?

The controller detected disagreement between redundant throttle-position or pedal-position signals beyond its allowed relationship.

Does P2135 identify the broken part?

No. Electronic throttle systems use redundant signals for safety. A fault can trigger reduced-power mode. The cause may be sensor, connector, harness, shared reference/ground, throttle body, pedal assembly, or controller related. Confirm the exact vehicle definition and test the relevant branches before ordering a part.

Is it safe to drive with P2135?

Do not use the code alone to decide whether the vehicle is safe to drive. Stop and arrange qualified help for severe drivability, flashing warning lamps, smoke, fuel odor, overheating, braking or steering changes, electrical heat, or high-voltage damage.

How much does P2135 cost to repair?

The code alone cannot produce a defensible repair price. Cost depends on the confirmed cause, exact vehicle, parts choice, labor time, local labor rate, tax, supplies, and whether related damage is present.

What should I record before clearing P2135?

Record the reporting module, stored or pending status, freeze-frame data, readiness state, related codes, symptoms, battery voltage, and unavailable evidence. Clearing first can erase the most useful failure-scene context.

DEFINITION LIMIT

This page explains a commonly standardized code at a general level. Confirm the exact definition, module, status, test conditions, thresholds, wiring, and service process for the vehicle using current official information.

AUTHORSHIP · SOURCES · CORRECTIONS

See how this page earns trust.

These links are primary-source starting points for the page's scope. They do not replace the current manufacturer procedure, wiring, specification, or service information for a specific vehicle.

Publisher

ScanWrench Editorial is the working byline for this library. Joshua Black, founder and publisher, is responsible for publication decisions, disclosures, and corrections.

A reviewed date means an editorial scope and safety check. It is not an ASE credential, OEM authorization, or vehicle-specific repair approval.

Primary sources

Revision history

  1. Reviewed edition: claim boundaries, safety language, internal links, and cited source scope checked.

No material correction has been recorded after this edition. If that changes, the correction and review date will be listed here.

Report a possible correction ↗