Cylinder 2 contributed to a detected misfire condition.
CASE 02CombustionIntermediate8 minutes
Misfire under load
2020 gasoline crossover · Hesitation during acceleration
Simulated evidenceNo vehicle commandsEvery decision explained
THE FAILURE SCENE
A saved scan shows one cylinder-specific code. The symptom is not reproduced while a phone is handheld; all road-load captures were logged by a passenger.
The fault matured under load rather than idle.
The snapshot does not show a broad fuel-control shift.
Repeatability strengthens the load-specific path.
DECISION 1 / 3
What does P0302 prove?
The code definition is verified for the reporting controller.
AUTHORSHIP · SOURCES · CORRECTIONS
See how this page earns trust.
These links are primary-source starting points for the page's scope. They do not replace the current manufacturer procedure, wiring, specification, or service information for a specific vehicle.
Publisher
ScanWrench Editorial is the working byline for this library. Joshua Black, founder and publisher, is responsible for publication decisions, disclosures, and corrections.
A reviewed date means an editorial scope and safety check. It is not an ASE credential, OEM authorization, or vehicle-specific repair approval.
Primary sources
- SAE J2012 — Diagnostic Trouble Code DefinitionsSAE International · Standardized DTC structure, definitions, and manufacturer-controlled ranges.
- SAE on-board diagnostics standards indexSAE International · Primary standards family for regulated OBD services, identifiers, and transport context.
- NHTSA datasets and APIsNational Highway Traffic Safety Administration · Primary U.S. recall, complaint, investigation, rating, and manufacturer-communication data.
Revision history
- Simulation review: claim boundaries, safety language, internal links, and cited source scope checked.
No material correction is hidden. Material additions and corrections are dated above when they occur.
Report a possible correction ↗